Deghat Gostar Eng. Co.
Main menu:
Process Calibrators
Sales > caegories > Calibrators
Hand-Held Calibrators
;)
Calog Pressure II Calibrator
Pressure II Calibrator
The - Pressure II is the ideal calibrator for testing, measuring and calibration of all pressure based systems. In addition it contains functions to install and maintain all powered and non-powered milliamp loops.
Features:
Measure, source or simulate 0 to 24 mA
Measure 0 to 32 Vdc
Continuity test function
Increment, step, auto step or ramp with built-in 24V power supply for mA loops
Displays values in mA and % or % and mA
Keller series PA-33x Digital Pressure sensors used
Pressure readings in many different units: bar, mbar, kPa, MPa, psi, m H2O, in H2O, ft H2O, mm Hg, cm Hg, in Hg, kg/cm2, atm.
Logged data is downloaded via the onboard USB port
Contains a simple pressure conversion menu
Trend logging with programmable timebase of all measured values
Carry case, protective rubber boot, Li-ion battery, charger, test leads and SD card supplied as standard
1 year guarantee against faulty material or workmanship (batteries not included)
Pressure II Calibrator
The - Pressure II is the ideal calibrator for testing, measuring and calibration of all pressure based systems. In addition it contains functions to install and maintain all powered and non-powered milliamp loops.
Features:
Measure, source or simulate 0 to 24 mA
Measure 0 to 32 Vdc
Continuity test function
Increment, step, auto step or ramp with built-in 24V power supply for mA loops
Displays values in mA and % or % and mA
Keller series PA-33x Digital Pressure sensors used
Pressure readings in many different units: bar, mbar, kPa, MPa, psi, m H2O, in H2O, ft H2O, mm Hg, cm Hg, in Hg, kg/cm2, atm.
Logged data is downloaded via the onboard USB port
Contains a simple pressure conversion menu
Trend logging with programmable timebase of all measured values
Carry case, protective rubber boot, Li-ion battery, charger, test leads and SD card supplied as standard
1 year guarantee against faulty material or workmanship (batteries not included)
;)
Calog Loadcell II Calibrator
The - Loadcell II Calibrator is ideal for testing 4 and 6 wire loadcells, checking insulation breakdown, weighing system calibration and simulation.
It can test a loadcells' zero balance, input resistance, output resistance, bridge balance, 50V DC insulation test from bridge to shield, bridge to housing and shield to housing.
Features:
Measure, source and simulate 0 to 24 mA with 1uA resolution
Measure 0 to 20 V with 1mV resolution
Measure -4.5 to 35 mV with 1uV resolution
Measure mV, mV & Mass or Mass & mV
Source mV, mV & Mass or Mass & mV
Simulate mA, mA & Mass or Mass & mA
Built-in 24V power supply for mA loops
1 year guarantee (batteries not included)
Carry case, protective rubber boot, charger and test leads supplied as standard
The - Loadcell II Calibrator is ideal for testing 4 and 6 wire loadcells, checking insulation breakdown, weighing system calibration and simulation.
It can test a loadcells' zero balance, input resistance, output resistance, bridge balance, 50V DC insulation test from bridge to shield, bridge to housing and shield to housing.
Features:
Measure, source and simulate 0 to 24 mA with 1uA resolution
Measure 0 to 20 V with 1mV resolution
Measure -4.5 to 35 mV with 1uV resolution
Measure mV, mV & Mass or Mass & mV
Source mV, mV & Mass or Mass & mV
Simulate mA, mA & Mass or Mass & mA
Built-in 24V power supply for mA loops
1 year guarantee (batteries not included)
Carry case, protective rubber boot, charger and test leads supplied as standard
;)
Calog LOOP II
The - LOOP II is a high precision, multi-function, hand-held calibrator designed for the process control industry. It’s speciality is milliamp loop powered instruments which it can measure, source and simulate. DC voltage and circuit continuity can also be measured.
The TREND logging feature is ideal for graphing and PID controller optimization. Datalogging stores data on the SD card supplied and is easily downloaded to a PC via the onboard USB port.
Features:
Measure, source or simulate 0 to 24 mA
Measure 0 to 32 Vdc
Continuity test function
Increment, step, auto step or ramp with built-in 24V power supply for mA loops
Displays values in mA and % or % and mA
Logged data is downloaded via the onboard USB port
Trend logging with programmable timebase of all measured values
Carry case, protective rubber boot, Li-ion battery, charger, test leads and SD card supplied as standard
1 year guarantee against faulty material or workmanship (batteries not included)
The - LOOP II is a high precision, multi-function, hand-held calibrator designed for the process control industry. It’s speciality is milliamp loop powered instruments which it can measure, source and simulate. DC voltage and circuit continuity can also be measured.
The TREND logging feature is ideal for graphing and PID controller optimization. Datalogging stores data on the SD card supplied and is easily downloaded to a PC via the onboard USB port.
Features:
Measure, source or simulate 0 to 24 mA
Measure 0 to 32 Vdc
Continuity test function
Increment, step, auto step or ramp with built-in 24V power supply for mA loops
Displays values in mA and % or % and mA
Logged data is downloaded via the onboard USB port
Trend logging with programmable timebase of all measured values
Carry case, protective rubber boot, Li-ion battery, charger, test leads and SD card supplied as standard
1 year guarantee against faulty material or workmanship (batteries not included)
;)
Calog TEMP Calibrator
The - TEMP Calibrator is ideal for testing, measuring and calibration of all Thermocouple and RTD based systems. In addition it contains functions to install and maintain all powered and non-powered milliamp loops.
Measure, source or simulate 0 to 24 mA
Measure and source -10 to 100 mV
Measure and source 0 to 400.00 ? and 0 to 2200.0 ?
Measure and source types K, J, T, B, R, S, E, N, U and L thermocouples with configurable internal, external or manual cold-junction compensation in either °C, °F, Kelvin or Rankine
Measure and source Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100 and Ni120 type RTD sensors
Continuity test function
Increment, step, ramp or valve stroking with built-in 24V power supply for mA loops
Datalogging facility via SD card which is downloadable using the USB port
Trend logging feature with programmable timebase
Carry case, protective rubber boot, Li-ion battery, charger, test leads, CJ Compensation box and SD card supplied as standard
1 year guarantee
The - TEMP Calibrator is ideal for testing, measuring and calibration of all Thermocouple and RTD based systems. In addition it contains functions to install and maintain all powered and non-powered milliamp loops.
Measure, source or simulate 0 to 24 mA
Measure and source -10 to 100 mV
Measure and source 0 to 400.00 ? and 0 to 2200.0 ?
Measure and source types K, J, T, B, R, S, E, N, U and L thermocouples with configurable internal, external or manual cold-junction compensation in either °C, °F, Kelvin or Rankine
Measure and source Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100 and Ni120 type RTD sensors
Continuity test function
Increment, step, ramp or valve stroking with built-in 24V power supply for mA loops
Datalogging facility via SD card which is downloadable using the USB port
Trend logging feature with programmable timebase
Carry case, protective rubber boot, Li-ion battery, charger, test leads, CJ Compensation box and SD card supplied as standard
1 year guarantee
;)
Calog PROCESS Calibrator
The - Pro is ideal for testing, installing and calibration of most process control systems, especially PLC based systems. It's main function is as a precision calibrator and measuring device of Voltage, Current and Frequency.
Features:
Measure, source or simulate 0 to 24 mA
Measure 0 to 32 Vdc and Source 0 to 12 Vdc
Measure and source -10 to 100 mV
Continuity test function
Measure and source frequency from 0 to 20kHz
Measure and source counts up to 8 digits (99 999 999)
Increment, step, auto step or ramp with built-in 24V power supply for mA loops
Displays values in mA and % or % and mA
Simultaneously measure and source all mA, mV and V combinations (not isolated)
This unit covers most requirements of PLC and SCADA applications.
Carry case, protective rubber boot, rechargeable battery, charger and test leads supplied as standard
1 year guarantee against faulty material or workmanship (batteries not included)
The - Pro is ideal for testing, installing and calibration of most process control systems, especially PLC based systems. It's main function is as a precision calibrator and measuring device of Voltage, Current and Frequency.
Features:
Measure, source or simulate 0 to 24 mA
Measure 0 to 32 Vdc and Source 0 to 12 Vdc
Measure and source -10 to 100 mV
Continuity test function
Measure and source frequency from 0 to 20kHz
Measure and source counts up to 8 digits (99 999 999)
Increment, step, auto step or ramp with built-in 24V power supply for mA loops
Displays values in mA and % or % and mA
Simultaneously measure and source all mA, mV and V combinations (not isolated)
This unit covers most requirements of PLC and SCADA applications.
Carry case, protective rubber boot, rechargeable battery, charger and test leads supplied as standard
1 year guarantee against faulty material or workmanship (batteries not included)